Extension gel Premium Gel No. 17

Premium Gel is a universal gel for building, modeling and strengthening natural nails. With the help of these gels, you can grow a nail of any length both in beauty salons and at home. They have different shades that are ideal as a base for a French manicure, as well as an independent coating.

Features :
● Acid-free.
● It has shock absorption, does not crack when hit.
● Medium consistency (rare and not thick).
● Medium pigmentation, covers the free edge.
● Suitable for all nail extension techniques.
● Does not cause burning in the lamp.
● It becomes thicker in the cold, thinner in the heat.
● Thixotropic — becomes thinner in work with brush movements.
● You can additionally heat it to make the gel thinner.
● Solid in 1mm thickness, if the thickness is less than 1mm, it may bend a little, but it does not affect the wearability in any way.
● Has good cushioning.
● The thickness on the end should be 1 mm, not less.
● When strengthening with this gel, you need to file the natural nail
● Does not shrink and holds the arch well.
● Rubber base is required.

Classic extension:
1. Removal.
2. We take the length of the nail up to 1 mm and make a round shape.
3. With a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit.
4. Manicure.
5. If you work with removers, you need to wash your hands with soap and water after using them.
6. Nail degreasing. It is necessary to make two approaches. We use 4 napkins. One napkin for 5 fingers. The first approach is to wipe the surface of the nail. The second approach is to take an orange stick, put on a napkin and wipe everything in the cuticle area and in the sinuses.
7. Dehydrator (optional).
8. Lunamoon primer.
9. Lining with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to draw all sinuses of the nail. Dry for 30 seconds.
10. Wipe off stickiness.
11. We put a form for building up the free edge.
12. We lay out the shape of an artificial nail with a transparent gel. Dry for 30 seconds.
13. We dust the free edge and make the shape we need.
14. We wipe off stickiness and excess dust.
15. We once again apply the Rubber base to the areas where the saw was used. Dry for 30 seconds.
16. Align with gel, put in the lamp and clamp for 10-15 seconds. If the gel has strong pigmentation or contains glitter, you need to clamp for 20 seconds.
17. Dry in a lamp for 120 seconds.
18. Before applying the gel polish, wipe off the stickiness.
19. Apply top coat and dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.

Strengthening:
1. Removal.
2. We do not dust the shape of the nail. Or we leave a spare 2 mm of length, which we dust and take away after leveling.
3. With a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate. Or use a buff of 100 grit.
4. Manicure.
5. If you work with removers, you need to wash your hands with soap and water after using them.
6. Nail degreasing. It is necessary to make two approaches. We use 4 napkins. One napkin for 5 fingers. The first approach is to wipe the surface of the nail. The second approach is to take an orange stick, put on a napkin and wipe everything in the cuticle area and in the sinuses.
7. Dehydrator (optional).
8. We use the primer as desired. But if the base for the substrate has sufficient acidity, then a primer is not needed.
9. Lining with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to draw all sinuses of the nail. Dry for 30 seconds.
10. Wipe off stickiness.
11. Alignment. Dry in a lamp for 120 seconds.
12. Form dusting after alignment. This is necessary so that a thickness is formed on the end that will hold the free edge.
13. It is necessary to file the natural nail, for better wearability, if this is not done, there will be peeling on the free edge of the nail.
14. After sawing, we wipe off the stickiness.
15. If necessary, cover with gel varnish.
16. Apply top coat and dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.