Carbide milling cutter, blue cone, diameter 2.3 mm / working part 14 mm

The cutters are made of carbide and tungsten, therefore they are durable, reliable and rigid. The carbide cone cutter with a cross-shaped cut has a working part diameter of 2.3 mm and two degrees of abrasiveness: fine (red), medium (blue). The cutter is used in hardware manicure and pedicure, for removing dense artificial material and treating skin. Areas of application of the carbide cutter cone FKZUD 023C: correction of extended nails; internal correction of the nail plate; removal of detachments in the side ridges during correction; thinning of keratotic nails. When using; pay attention to proper care. Cleaning and washing of the cutter should be carried out after each client. Ideally, use an ultrasonic cleaner, followed by sterilization and disinfection. The cutters should be stored in a special container and should not be exposed to dust or moisture. KEY FEATURES ● standard cross-shaped cutting ● high quality materials ● high strength and wear resistance to external influences ● do not heat up during operation ● the center of rotation does not shift at high speeds ● subject to all types of sterilization and disinfection standard cross-shaped cutting high quality materials high strength and wear resistance to external influences do not heat up during operation, the center of rotation does not shift at high speeds, is subject to all types of sterilization and disinfection